habitat et jardin 103109, Руководство пользователя

Страница: 15 / 16

( In case of doubt on the pump or any circulation devices, please contact After Sales Service directly, co
ntact details in the following affix.
the address or telephone number where the consumer/installer can obtain additional information during
the installation in the event of problems.)
The control valve or
its upper cover is
leaked
The body seal is lost
The body seal is too
dirty
The control valve buckle
is not fastened
The control valve is
damaged
Remove the upper control valve cover and install the body seal
Use a water hose to clean the body seal
Use a screwdriver to tighten the bolt
Please contact Customer Service Center for replacement
The bellows is
leaked
The bellows hoop is not
tightened
The water port seal is
lost
Tighten the hoop
The water port seal is no damaged in place
The pressure gauge
does not action
The inner wall of the
pressure gauge is
blocked
Pressure gauge damage
Remove the pressure gauge from the control valve and clean the
impurities on the inner wall
Please contact Customer Service Center for replacement
The sand enters into
the tank
The sand particles are
too fine
Use only No. 20 silica sand, with the sand particle size of
0.45-0.85 mm
ˈ ˄
i.e. 0.018-0.033 inches
˅
, and the overall particle
uniformity coefficient of which is smaller than 1.75.
Or replace the sand
Product specifications
Model 103109 BC002A
Voltage 220-240V
Power 60W 90W
Maximum operating
pressure
<0.2bar (3psi)
＜
0.3(4.5psi)
Effective filtrating
area
0.058m² (0.62ft²) 0.058m² (0.62ft²)
Maximum water flow
rate
800 gallons/hr (3028 l / h) 1000 gallons/hr (3785 l / h)
Maximum water
temperature
35
℃
Recommended filter
media
20# quartz sand or glass sand, with particle size of 0.45-0.85 mm
，
（
i.e. 0.018-0.033 inches
）
, and the overall particle uniformity
coefficient of which is smaller than 1.75.
Recommended
number of media
Quartz sand or glass sand, 10 kg
Please read carefully and save it for future reference