Haas Automation UMC-1000, Дополнение к руководству оператора

Страница: 29 / 70

Safety
11
1.4 Modifications to the Machine
Haas Automation, Inc. is not responsible for damage caused by modifications you make to
your Haas machine(s) with parts or kits not manufactured or sold by Haas Automation, Inc.
The use of such parts or kits may void your warranty.
Some parts or kits manufactured or sold by Haas Automation, Inc. are considered
user-installable. If you choose to install these parts or kits yourself, be sure to completely
read the accompanying installation instructions. Make sure you understand the procedure,
and how to do it safely, before you begin. If you have any doubts about your ability to
complete the procedure, contact your Haas Factory Outlet (HFO) for assistance.
1.5 Improper Coolants
Coolant is an important part of many machining operations. When it is correctly used and
maintained, coolant can improve part finish, lengthen tool life, and protect machine
components from rust and other damage. Improper coolants, however, can cause
significant damage to your machine.
Such damage can void your warranty, but it can also introduce hazardous conditions to
your shop. For example, coolant leaks through damaged seals could create a slipping
hazard.
Improper coolant use includes, but is not limited to, these points:
•
Do not use plain water. This causes machine components to rust.
• Do not use flammable coolants.
• Do not use straight or “neat” mineral-oil products. These products cause damage to
rubber seals and tubing throughout the machine. If you use a minimum-quantity
lubrication system for near-dry machining, use only the recommended oils.
Machine coolant must be water-soluble, synthetic oil-based or synthetic-based coolant or
lubricant.
NOTE: Be sure to maintain your coolant mixture to keep the coolant
concentrate at acceptable levels. Improperly maintained coolant
mixtures can allow machine components to rust. Rust damage is not
covered by your warranty.
Ask your HFO or your coolant dealer if you have questions about the specific coolant that
you plan to use.