Haas Automation UMC-1000, Дополнение к руководству оператора

Страница: 12 / 70

x
USA: Haas Automation certifies this machine to be in compliance with the OSHA and ANSI
design and manufacturing standards listed below. Operation of this machine will be
compliant with the below-listed standards only as long as the owner and operator continue
to follow the operation, maintenance, and training requirements of these standards.
•
OSHA 1910.212 - General Requirements for All Machines
• ANSI B11.5-1983 (R1994) Drilling, Milling, and Boring Machines
• ANSI B11.19-2003 Performance Criteria for Safeguarding
• ANSI B11.23-2002 Safety Requirements for Machining Centers and Automatic
Numerically Controlled Milling, Drilling, and Boring Machines
• ANSI B11.TR3-2000 Risk Assessment and Risk Reduction - A Guideline to Estimate,
Evaluate, and Reduce Risks Associated with Machine Tools
CANADA: As the original equipment manufacturer, we declare that the listed products
comply with regulations as outlined in the Pre-Start Health and Safety Reviews Section 7
of Regulation 851 of the Occupational Health and Safety Act Regulations for Industrial
Establishments for machine guarding provisions and standards.
Further, this document satisfies the notice-in-writing provision for exemption from Pre-Start
inspection for the listed machinery as outlined in the Ontario Health and Safety Guidelines,
PSR Guidelines dated April 2001. The PSR Guidelines allow that notice in writing from the
original equipment manufacturer declaring conformity to applicable standards is acceptable
for the exemption from Pre-Start Health and Safety Review.
Original Instructions
ETL LISTED
CONFORMS TO
NFPA STD 79
ANSI/UL STD 508
UL SUBJECT 2011
CERTIFIED TO
CAN/CSA STD C22.2 N O.73
All Haas CNC machine tools carry the ETL Listed mark,
certifying that they conform to the NFPA 79 Electrical
Standard for Industrial Machinery and the Canadian
equivalent, CAN/CSA C22.2 No. 73. The ETL Listed and
cETL Listed marks are awarded to products that have
successfully undergone testing by Intertek Testing
Services (ITS), an alternative to Underwriters'
Laboratories.
C
Haas Automation has been assessed for conformance
with the provisions set forth by ISO 9001: 2015. Scope of
Registration: Design and Manufacture of CNC Machines
Tools and Accessories, Sheet Metal Fabrication. The
conditions for maintaining this certificate of registration are
set forth in ISA's Registration Policies 5.1. This
registration is granted subject to the organization
maintaining compliance to the noted stardard. The validity
of this certificate is dependent upon ongoing surveillance
audits.
9001 : 2015