Haas Automation UMC-1000 Скачать руководство пользователя страница 21

Страница: 21 / 70

Safety

Adding lubricants
•

Adding lubricants for spindle and axes is required at regular intervals. These

are often months or years in length. This is a normal operator function and is

always done from a safe location outside of the work enclosure.

Cleaning chips out of the machine
•

Cleaning out of chips is required at intervals dictated by the type of machining

performed. This is a normal operator function. It is performed with the doors

open and all of the machine operation is stopped.

Service only consists of the following:
1.

Repairing of a machine that is not operating correctly
•

Any machine that is not operating correctly requires service by factory trained

personnel. This is never an operator function. It is not considered

maintenance. Installation and service instructions are provided separately

from the Operator’s Manual.

Machine moving, unpacking, and installation
•

Haas machines are shipped to a user’s location almost ready to operate. They

still require a trained service person to complete the installation. Installation

and service instructions are provided separately from the Operator’s Manual.

Machine packing
•

Machine packing for shipment requires the same packing material supplied by

Haas in the original shipment. Packing requires a trained service person to

complete the installation. Shipping instructions are provided separately from

the Operator’s Manual.

Decommission, dismantle and disposal
•

Machine is not expected to be disassembled for shipment; it can be moved in

its entirety in the same manner in which it was installed. Machine can be

returned to the manufacturer’s distributor for disposal; manufacturer accepts

any/all components for recycling per Directive 2002/96/EC.

End-of-life disposal
•

End-of-life disposal must conform to the laws and regulations in the region the

machine is located. This is a jointly the responsibility of the owner and seller of

the machine. The risk analysis does not address this phase.

Содержание UMC-1000







































































Результаты поиска

Содержание UMC-1000

Отзывы:

Похожие инструкции для UMC-1000

Бренды по названию

Популярные бренды

Haas Automation UMC-1000, Дополнение к руководству оператора

Результаты поиска

Содержание UMC-1000

Отзывы:

Похожие инструкции для UMC-1000

Бренды по названию

Популярные бренды