Haas Automation UMC-1000, Дополнение к руководству оператора

Страница: 32 / 70

Safety Decals
14
T1.4: Prohibited Action Symbols – Red Circles with Slash-Through
Long tools are dangerous, especially at spindle speeds higher than 5000
RPM. The tools can break and eject from the machine.
Remember that machine enclosures are intended to stop coolant and
chips. Enclosures may not stop broken tools or thrown parts.
Always check your setup and tooling before you start machining.
Machining operations can create hazardous chips, dust or mist. This is
function of the materials being cut, the metalworking fluid and cutting tools
used and the machining speeds/feeds.
It is up to the owner/operator of the machine to determine if personal
protective equipment such as safety goggles or a respirator is required
and also if a mist extraction system is needed.
Some models have a provision for connecting a mist extraction system.
Always read and understand the Safety Data Sheets (SDS) for the
workpiece material, the cutting tools and the metalworking fluid.
Symbol Description
Do not enter the machine enclosure when the machine is capable of
automatic motion.
When you must enter the enclosure to complete tasks, press
[EMERGENCY STOP]
or power off the machine. Put a safety tag on
the control pendant to alert other people that you are inside the machine,
and that they must not turn on or operate the machine.
Do not machine ceramics.
Symbol Description