12
© HAAG-STREIT AG, 3098 Koeniz, Switzerland - HS-Doc. No. 1500.7200492-04150 – 15. Edition / 2017 – 01
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
PORTUGUÊS
SVENSKA
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
PORTUGUÊS
SVENSKA
F. Information and manufacturer's declaration
concerning electromagnetic compatibility
(EMC)
F.1 General
The BM 900 slit lamp system fulfills the requirements on electromagnetic compati
-
bility according to EN 60601-1-2:2007 (IEC 3. Edition) + EN 60601-1-2:2015 (IEC 4.
Edition). The instrument is built so that the generation and emission of electromag-
netic interference is limited to the extent that other devices are not disturbed in their
use in accordance with the regulations and so that the instrument itself is suitably
immune to electromagnetic interference.
WARNING!
•
Electrical medical devices and systems are subject to special EMC
measures and must be installed in accordance with the EMC instruc-
tions contained in this accompanying document.
The operation of other lines or equipment than those listed may lead
to higher emissions or may reduce the device's resistance to interfe-
rence.
Third-party devices may only be connected in compliance with the
EN 60601-1 standard.
•
•
F.2 Emitted interference (standard table 1)
The information is based on the requirements of EN 60601-1-2:2007 (IEC 3rd edition) and EN 60601-1-2:2015 (IEC 4
th
edition).
Guidance and manufacturer's declaration – electromagnetic emissions
This product is intended for use in the electromagnetic environment specified below. The customer or the user of this product should assure that it is used in such an envi-
ronment
RF emissions CISPR 11
Group 1
This product uses RF energy only for its internal function. Therefore, its RF emissions are very low and
are not likely to cause any interference in nearby electronic equipment.
RF emissions CISPR 11
Class B
This product is suitable for use in all establishments, including domestic establishments and those
directly connected to the public low-voltage power supply network that supplies buildings used for
domestic purposes.
Emission of harmonics according to
EN 61000-3-2
Class A
Voltage fluctuations / flicker emissions
according to EN 61000-3-3
Fulfilled
Emission test
Compliance
Electromagnetic environment - guidance
01_IFU_BM900-7200492-04150_eng.indd 12
21.02.2017 09:55:00
