4-5
Memory Speed : 140MHz
BootWare Size : 512KB
Flash Size : 32MB
NVRAM Size : 512KB
CPLD Version is 1.00
Hardware Version is Ver.B
GE0 ..............................OK!
GE1 ..............................OK!
Press Ctrl+B to enter extend boot menu... 5
The last line prompts you to enter the Boot menu.
z
If you press <Ctrl + B> within 5 seconds, the program goes to the BootWare main menu. Refer to
section “BootWare Main Menu” on page 5-3 for details of the BootWare main menu. If you perform
no operation or press a key other than <Ctrl + B>
within five seconds, the system begins to
automatically start up and the following information is displayed:
The current starting file is main application file--flash:/main.bin!
The main application file is self-decompressing........................................
........................................................................................
........................................................................................
........................................................................................
........................................................................................
....................................................................OK!
System is starting...
User interface con0 is available.
Press ENTER to get started.
The prompt "Press ENTER to get started" indicates that the automatic startup of the AC is completed.
Press <Enter>. The following prompt is displayed:
<H3C>
You can configure the AC now.
H3C WX5002 AC provides various command views. For detailed information about related
configuration commands and command line interfaces, refer to
H3C WX Series Access Controllers
User Manual
and
H3C WX Series Access Controllers Web-Based Configuration Manual
.
