5-13
The TFTP server is not provided with H3C WX5002 AC. You need to purchase and install it yourself.
Step 2: Modify Ethernet interface parameters. Refer to section “Configuring Ethernet Interface
Parameters” on page 5-11 for details.
Step 3: After the above configuration, select
3
in the BootWare main menu to enter the Ethernet
submenu. In the following example, select
2
to upgrade the main application file.
Starting the TFTP download.................................Done
Please input file name(Press 'Enter' use default name):
After the download is done, enter the file name to start upgrade.
........................................................................................
........................................................................................
........................................................................................
........................................................................................
................................................
Writing into Flash Succeeds.
Step 4: Select
0
to return to the BoorWare main menu. Select
1
to boot the system.
z
If the input file name is the same as the one of the original file in the Flash, the system prompts
“flash:/main.bin exist, overwrite?[Y/N]”. If you choose Y, the original file in the Flash will be
overwritten.
z
Make sure the available space on the Flash is sufficient. Or, the system prompts insufficient space:
No enough space in flash!
Writing into Flash Fails.
z
The updated file will directly replace the original one of this type and become the only application
file. In this example, the downloaded file main.bin replaces the original type M file and becomes the
main application file.
z
Refer to section “Files Managed by the AC” on page 5-1 for detailed descriptions on file types.
Maintaining Application Programs and Configurations Through
Command Lines
After booting the AC normally, you can upgrade/back up application programs and back up/restore
configurations through command lines.
