2-16
Figure2-18 Installing an expansion module
Installing an expansion module on the rear panel
You can install EWPXM1XG20 expansion modules in slot 1 or slot 2 in the rear panel.
To install an expansion module, for example, EWPXM1XG20 in slot 1:
1.
Use a Phillips screwdriver to remove the screws on the filler panel and then remove the filler
panel.
Keep the filler panel for future use.
2.
Pull the ejector levers on the module outward and slide the module slowly into the slot along the
guide rails.
3.
Press the ejector levers inward until they touch the panel tightly and the module seats into the
slot securely.
4.
Use a Phillips screwdriver to fasten the captive screws on the module.
