7
Figure6
Mount the wall-mounting bracket on the ceiling
(1) Bolt inside the ceiling
(2) Washer
(3) Nut
(4) Wall-mounting bracket
(5) Bolt cap
(6) Key-hole clip
Step3
Mount the WA2612-AGN to the wall-mounting bracket. For details, refer to
Installing the AP on the wall-mounting bracket.
Mounting the AP to a T-Rail
Note:
The width of the T-rail must be in the range of 14 mm (0.55 in) to 24 mm (0.94).
Follow these steps to mount the AP to a T-rail:
Step1
Loosen the two M3 × 6 screws on each clip holder until the screw heads are
lower than the upper edge of the nuts (do not remove the screws or they may
get lost).
Step2
Adjust the T-rail clips to make the T-rail holder wider than the T-rail, and then
lock the T-rail with the T-rail holder according to the arrow
