4
There are five mounting holes in total in the wall-mounting bracket of the
WA2612-AGN. Select the three round holes (with a diameter of 5 mm, or 0.20 in) for
the installation.
Figure1
Mounting hole pattern of, the WA2612-AGN wall-mounting bracket:
Step2
Insert the pointed end of wall anchors into the drilled holes and tap the flat end
of wall anchors with a rubber hammer until they are all flush with the wall
surface.
Step3
Align the holes in the wall-mounting bracket with the wall anchors and insert
screws through the mounting holes into the wall anchors, as shown in
Figure1.
Figure2
Install the wall-mounting bracket of the WA2612-AGN
(1) Drill hole
(2) Wall anchor
(3) Wall-mounting bracket
(4) Key-hole clip
(5) Screw
