6
Note:
The lock is user supplied.
Mounting the AP on a ceiling
Note:
1) To use this installation method, make sure that the thickness of the ceiling is
less than 18 mm (0.71 in), and the ceiling can bear the weight of at least 5 kg
(11.02 lb.).
2) You are not recommended to use this method to mount the AP to a location
made of low-intensity materials such as a plaster ceiling. If this installation
method is required in such an environment, put a high-intensity plate
beneath the nut to secure the installation.
Select the two mounting holes of the wall-mounting bracket as shown in Figure5 to
mount the AP on the ceiling (in mm). Follow these steps to mount the AP on the
ceiling:
Step1
Drill two holes in the ceiling corresponding to the two mounting holes in the
wall-mounting bracket.
Figure5
mounting holes on the wall-mounting bracket
(1) Mounting holes for mounting on a ceiling
Step2
Insert the bolts through the mounting holes of the wall-mounting bracket and
the drilled holes on the ceiling, and then tighten the nuts on the other side of
the ceiling to secure the wall-mounting bracket as shown in Figure6.
