H3C SecBlade, Руководство пользователя

Страница: 78 / 85

71
Figure 53 OAA configuration
Table 8 describes OAA client configuration items.
Table 8 OAA client configuration items
Item Description
ACFP Client
Specify whether to enable ACFP client.
The ACFP client is enabled by default.
Username
Set the username of the OAA client. The username should be the same with the
related configuration of the SNMP on the OAA server.
Authentication Password
Encryption Password
Set the authentication password and encryption password for the OAA client.
Three security levels are available: no authentication no privacy, authentication
without privacy, and authentication with privacy. The security level you set should
be the same with the related configuration of the SNMP on the OAA server.
NOTE:
The switch supports MD5 authentication and DES encryption. To perform
authentication with privacy, configure MD5 authentication and DES encryption for the
SNMP configuration on the OAA server.
OAA Server IP Set the IP address for the OAA server.
VLAN ID Specify the VLAN to which the internal interface belongs.
IP Address Set the IP address for the internal interface.
Subnet Mask Set the subnet mask for the internal interface.
After configuring the OAA client, click Test Connectivity to test the connectivity between the OAA client
and the server.
NOTE:
By clicking Test Connectivity , you can use the configured parameters to test the connectivity between the
OAA client and the server. After the connectivity test succeeds, click Apply to submit your configuration.