8
Figure 3
web interface login interface
By default, the IPS card has HTTPS enabled, but does not have HTTP enabled. Therefore, for the first login,
only the HTTPS method is available. After the first login through HTTPS, you can enable HTTP as follows:
select
System Management
>
Network Management
>
Management Interface
from the navigation tree
to enter the page shown in
Figure 4
.
Figure 4
HTTP/HTTPS configuration
Select the checkbox before HTTP and click
Apply
. A confirmation dialog box pops up, showing
“Changing the IP address of the management interface may break the network connection. Continue?”.
Click
OK
on the dialog box to complete configuration.
WARNING!
•
The PC in
Figure 2
is a common configuration terminal and is not required to be a web network
management terminal.
•
Do not log in to the web interface through both HTTP and HTTPS at the same time from a PC.
After the first login, H3C recommends changing the default password. For more information, see
User
Management
in the
H3C Intrusion Prevention System Web-Based Configuration Guide.
Содержание SecBlade
Страница 7: ...ii Index 78 ...
Страница 84: ...77 Figure 64 Activate the configuration ...
