64
To do…
Use the command…
Remarks
Configure the
OAA client
and the
internal
interface
Select
System Management > Device
Management > OAA Configuration
. Input
parameters in
OAA Client Configuration
and
Internal Interface Configuration
to
complete OAA configuration.
Required
Configure
OAA
Test the
connectivity
Click the
Test
Connectivity
button to test
the connectivity between the OAA client
and the server.
Required
Create security zones
Select
System Management > Network
Management > Security Zone
. Use the
Add
button to create security zones and
add the interfaces of the SR6600 router
to the security zones.
Required
The interface list of the router is
sent to the OAA board (the
SecBlade IPS card in this case),
and you can add interfaces to
security zones.
Create a segment
Select
System Management > Network
Management > Segment Configuration
.
Click
Add Segment
. Select a segment
number, the internal zone, and the
external zone.
Required
You need to specify the internal
interface when creating the
segment. The internal interface
connects to the router.
Displaying the configuration
Use the following command in any view of the SecBlade IPS card to view the forwarding information of
the internal 10GE interface:
To do…
Use the command…
Display the running status and forwarding
information of the 10GE interface
display
interface
[
interface-name
]
Table 7
Use the following commands in any view of the router to view ACFP information.
To do…
Use the command…
Display the ACFP server information
display acfp server-info
Display the ACFP client information
display acfp client-info
[
client-id
]
Display the ACFP policy information
display acfp policy-info
[
client
client-id
[
policy-index
] |
dest-interface
interface-type interface-number
|
global
|
in-interface
interface-type interface-number
|
out-interface
interface-type interface-number
] [
active
|
inactive
]
Display the ACFP rule information
display acfp rule-info
{
global
|
in-interface
[
interface-type
interface-number
] |
out-interface
[
interface-type
interface-number
] |
policy
[
client-id policy-index
] }
Configuration Example
Network requirements
As shown in
Figure 45
, the router has one SRPU installed in slot 6, one switching board inserted in slot
1, and one SecBlade IPS card inserted in slot 11. The router uses GigabitEthernet 1/0/1 and
Содержание SecBlade
Страница 7: ...ii Index 78 ...
Страница 84: ...77 Figure 64 Activate the configuration ...
