26
Figure 15
Connectivity test result
# Configure security zones.
After completing OAA configuration on the SecBlade IPS card and the S7500E, you can add any
physical ports of the S7500E to a security zone except the internal interface.
In this example, create internal security zone
Inside
and add GigabitEthernet 3/0/1 and
GigabitEthernet 3/0/2 to the internal security zone, as shown in
Figure 16
. Create external security zone
Outside
and add GigabitEthernet 3/0/20 to the external security zone in the same way.
Figure 16
Create a security zone
# Configure a segment.
Figure 17
Create a segment
NOTE:
When creating a segment, you need to select the internal zone, external zone and the internal interface.
Содержание SecBlade
Страница 7: ...ii Index 78 ...
Страница 84: ...77 Figure 64 Activate the configuration ...
