Command Manual – MPLS Basics
H3C S9500 Series Routing Switches
Chapter 1 MPLS Basics Configuration Commands
1-63
Description
Use the
mpls ldp remote-peer
command to create a remote peer entity and enter
MPLS LDP remote peer view.
Use the
undo mpls ldp remote-peer
command to remove a remote peer entity.
Related commands:
remote-ip
.
Examples
# Create a remote peer entity named BJI.
<Sysname> System-view
[Sysname] mpls ldp remote-peer BJI
[Sysname-mpls-ldp-remote-bji]
1.1.38 mpls ldp timer hello-hold
Syntax
mpls ldp timer
hello-hold value
undo mpls ldp timer hello-hold
View
Interface view/MPLS LDP remote peer view
Default Level
1: Monitor level
Parameters
value
: Length of time for the Hello timer.
Description
Use the
mpls ldp timer hello-hold
command to set the Hello timers.
Use the
undo mpls ldp timer hello-hold
command to restore the defaults.
In interface view, you configure the link Hello timer; in MPLS LDP remote peer view, you
configure the targeted Hello timer.
By default, the value of the link Hello timer is 15 seconds, while that of the targeted
Hello timer is 45 seconds.
Note:
Changing the values of the Hello timers does not affect any existing session.
