Command Manual – MPLS Basics
H3C S9500 Series Routing Switches
Chapter 1 MPLS Basics Configuration Commands
1-31
2.2.2.9:0 1.1.1.9/32 1027/NULL Vlan12/-------
----------------------------------------------------------------
The Total LDP CR-LSP(s): 2
1.1.11 display mpls ldp interface
Syntax
display mpls ldp interface
[
all
] [ [
vpn-instance
vpn-instance-name
] [
interface-type
interface-number
] ] [
verbose
] [ | {
begin
|
exclude
|
include
}
regular-expression
]
display mpls ldp interface
[
all
] [
verbose
] [ | {
begin
|
exclude
|
include
}
regular-expression
]
View
Any view
Default Level
1: Monitor level
Parameters
all
: Displays all information.
vpn-instance-name
: Name of the VPN instance.
interface-type interface-number
: Specifies an interface by its type and number.
verbose
: Displays detailed information.
|
: Filters the output information.
begin
: Begins with the specified string.
include
: Includes the specified string.
exclude
: Excludes the specified string.
regular-expression
: Regular expression. No blank space is acceptable.
Description
Use the
display mpls ldp interface
command to display the information about the
LDP-enabled interfaces.
Related commands:
mpls ldp
(System view) and
mpls ldp
(Interface view).
Examples
# Display the information about the LDP-enabled interfaces.
<Sysname> display mpls ldp interface
LDP Interface Information in Public Network
-------------------------------------------------------------------
IF-Name Status LAM Transport-Address Hello-Sent/Rcv
