23
RJ-45 Signal DB-9 Signal
4 SG
5 SG
5 SG
5 SG
6 RXD
3 TXD
7 DSR
4 DTR
8 CTS
7 RTS
To connect a terminal (for example, a PC) to the switch by using the serial console cable:
1.
Plug the DB-9 female connector of the serial console cable to the serial port of the PC.
2.
Connect the RJ-45 connector to the serial console port of the switch.
NOTE:
•
Identify the mark on the console port and make sure you are connecting to the correct port.
•
The serial ports on PCs do not support hot swapping. To connect a PC to an operating switch,
first connect the PC end. To disconnect a PC from an operating switch, first disconnect the switch
end.
Connecting the mini USB console cable
A mini USB console cable has a USB mini-Type B connector at one end to connect to the mini USB
console port of the switch, and a standard USB Type A connector at the other end to connect to the
USB port on the configuration terminal.
To connect to the configuration terminal through the USB mini console cable:
1.
Connect the standard USB Type A connector to the USB port of the configuration terminal.
2.
Connect the USB mini Type B connector to the Mini USB console port of the switch.
3.
Click the following link, or copy it to the address bar on the browser to log in to download page
of the USB console driver, and download the driver.
Select a driver program according to the operating system you use:
{
XR21V1410_XR21B1411_Windows_Ver1840_x86_Installer.EXE
—32-bit operating
system.
{
XR21V1410_XR21B1411_Windows_Ver1840_x64_Installer.EXE
—64-bit operating
system.
5.
Click
Next
on the installation wizard.
