1
Configuring service loopback groups
About service loopback groups
A service loopback group contains one or multiple Ethernet ports for looping packets sent out by the
device back to the device. This feature must work with other features, such as GRE. Member ports in
a service loopback group are load balanced.
A service loopback group provides one of the following services:
•
Tunnel
—Supports unicast tunnel traffic.
•
Multicast
tunnel
—Supports multicast tunnel traffic.
•
Multiport
—Supports multiport ARP traffic.
Restrictions and guidelines: Service loopback
group configuration
When you add member ports to a service loopback group, follow these restrictions and guidelines:
•
Make sure the ports support the service type of the service loopback group and are not
members of any other service loopback group.
•
The configuration on a port is removed when it is assigned to the service loopback group.
•
To avoid IRF split, do not assign a physical interface to the service loopback group if that
interface is the only member interface of an IRF port.
•
For correct traffic processing, make sure the service loopback group has a minimum of one
member port when it is being used by a feature.
When you apply service loopback groups to features, follow these restrictions and guidelines:
•
One service loopback group can be used by multiple features.
•
You cannot change the service type of a service loopback group.
•
Do not delete a service loopback group that is being used by a feature.
Configuring a service loopback group
1.
Enter system view.
system-view
2.
Create a service loopback group and specify its service type.
service-loopback group
group-id type
{
{
multicast-tunnel
|
tunnel
}
*
|
multiport
}
You can configure only one service loopback group for a service type.
3.
Enter Layer 2 Ethernet interface view.
interface interface-type interface-number
4.
Assign the port to the service loopback group.
port service-loopback group
group-id
By default, a port does not belong to a service loopback group.
You can assign a maximum of 32 ports to a service loopback group.
Содержание S6850 Series
Страница 108: ...48 WGE1 0 3 32768 49153 50100 0x7b 0001 0001 0001 ACDEF...
Страница 259: ...21 6 N A 200 6...
Страница 337: ...ii...
