2
You can use the
display this
command to verify the configuration in interface view of
each member interface. In addition, if the configuration in system view is not needed, use
the
undo
form of the command to remove the configuration.
Procedure
1.
Enter system view.
system-view
2.
Create an interface range and enter interface range view.
{
Create an interface range without specifying a name.
interface range
{
interface-type interface-number
[
to
interface-type interface-number
]
}
&<1-24>
{
Create a named interface range.
interface range
name
name
[
interface
{
interface-type
interface-number
[
to interface-type interface-number
]
}
&<1-24>
]
3.
(Optional.) Display commands available for the first interface in the interface range.
Enter a question mark (?) at the interface range prompt.
4.
Use available commands to configure the interfaces.
Available commands depend on the interface.
5.
(Optional.) Verify the configuration.
display this
Display and maintenance commands for bulk
interface configuration
Execute the
display
command in any view.
Task Command
Display information about the interface ranges
created by using the
interface range name
command.
display interface range
[
name
name
]
Содержание S6850 Series
Страница 108: ...48 WGE1 0 3 32768 49153 50100 0x7b 0001 0001 0001 ACDEF...
Страница 259: ...21 6 N A 200 6...
Страница 337: ...ii...
