H3C S6850 Series, Руководство по настройке

Страница: 233 / 394

8
Applying the QoS policy
1. Enter system view.
system-view
2. Enter Layer 2 Ethernet interface view.
interface interface-type interface-number
3. Apply the QoS policy to the inbound direction of the port.
qos apply policy policy-name inbound
Display and maintenance commands for QinQ
Execute
display
commands in any view.
Task Command
Display QinQ-enabled ports.
display qinq [ interface
interface-type interface-number ]
QinQ configuration examples
Example: Configuring basic QinQ
Network configuration
As shown in Figure 3 :
•
The service provider assigns VLAN 100 to Company A's VLANs 10 through 70.
•
The service provider assigns VLAN 200 to Company B's VLANs 30 through 90.
•
The devices between PE 1 and PE 2 in the service provider network use a TPID value of
0x8200.
Configure QinQ on PE 1 and PE 2 to transmit traffic in VLANs 100 and 200 for Company A and
Company B, respectively.
For the QinQ frames to be identified correctly, set the SVLAN TPID to 0x8200 on the service
provider-side ports of PE 1 and PE 2.