8-2
Item
Specification
Functions and services
Software and Boot ROM upgrade and network management
Table8-3 Fiber management Ethernet port specifications
Item
Specification
Connector type
LC
Connector quantity
1
Port transmission rate
100/1000 Mbps, full duplex
Transmission medium and max
transmission distance
See
and
Functions and services
Software upgrade and network management
Table8-4 FE SFP transceiver modules
FE SFP transceiver
module
Central
wavelength
(nm)
Connector Fiber type and
diameter (µm)
Max transmission
distance
SFP-FE-SX-MM1310-
A
1310
LC
Multi-mode, 50/125
2 km (1.24 miles)
Multi-mode, 62.5/125
SFP-FE-LX-SM1310-A 1310
LC
Single-mode, 9/125
15 km (9.32 miles)
SFP-FE-LH40-SM131
0
1310
LC
Single-mode, 9/125
40 km (24.86 miles)
USB port
The switch has one OHC-compliant USB2.0 port that can upload and download data at a rate up to
480 Mbps. You can use this USB port to access the file system on the flash file system of the switch,
for example, to upload or download application and configuration files.
IMPORTANT:
•
USB devices from different vendors vary in compatibility and driver. H3C does not guarantee
correct operation of all USB devices on the switch. If a USB device fails to operate on the switch,
replace it with one from another vendor.
•
The USB port on the switch is designed to output current in strict accordance with the USB 2.0
standard. For a USB storage device to be identified by the USB port, make sure the USB device
fully complies with USB 2.0.
SFP+ port
An S6805-54HF switch provides 48 SFP+ ports. The SFP+ ports support the following transceiver
modules and cables:
•
Gigabit SFP transceiver modules in
•
10-Gigabit SFP+ transceiver modules in
•
10-Gigabit SFP+ copper cables in
•
10-Gigabit SFP+ fiber cables in
