45
regular-expression
: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the
display traffic behavior
command to display traffic behavior information.
Examples
# Display user-defined traffic behaviors.
<Sysname> display traffic behavior user-defined
User Defined Behavior Information:
Behavior: 2
Accounting enable: byte
Committed Access Rate:
CIR 12800 (kbps), CBS 4000 (byte), EBS 4000 (byte)
Green Action: pass
Red Action: discard
Yellow Action: pass
NetStream filter enable : permit
Redirect enable:
Redirect type: cpu
Redirect destination: cpu
Marking:
Remark dot1p COS 1
Marking:
Remark DSCP af12
Table 16
Output description
Field
Description
User Defined Behavior Information User-defined behavior information
Behavior
Name of a behavior
Marking Information
about traffic marking
Remark
Type of precedence marked for traffic, which can be DSCP, IP
precedence, dot1p (COS), qos local ID, local precedence, drop
precedence, customer VLAN ID, or service VLAN ID. For more
information about these precedence types, see “
.”
Accounting enable
Class-based accounting mode, in packets or in bytes
Committed Access Rate
Information about the CAR action
Green Action
Action to be taken on green packets
Red Action
Action to be taken on red packets
Yellow Action
Action to be taken on yellow packets
Redirect enable
Traffic redirecting configuration information
Redirect type
Traffic redirecting type, which can be redirecting traffic to the CPU, an
interface, or the next-hop
Redirect destination
Destination for traffic redirecting, which can be an interface name, the IP
address of the next hop, or the CPU
