37
Keyword and argument combination
Description
dscp
dscp-list
Matches DSCP values.
The
dscp-list
argument is a list of up to 8 DSCP values.
A DSCP value can be a number from 0 to 63 or any
keyword in
ip-precedence
ip-precedence-list
Matches IP precedence.
The
ip-precedence-list
argument is a list of up to eight
IP precedence values. An IP precedence ranges from
0 to 7.
protocol
protocol-name
Matches a protocol.
The
protocol-name
argument can be IP or IPv6.
qos-local-id
local-id-value
Matches a local QoS ID, which ranges from 1 to
4095.
The local QoS IDs supported on the S5800 Switch
Series and the S5820X Switch Series are from 1 to
3999.
service-dot1p
8021p-list
Matches the 802.1p priority of the service provider
network.
The
8021p-list
argument is a list of up to eight 802.1p
priority values. An 802.1p priority ranges from 0 to 7.
service-vlan-id
{
vlan-id-list
|
vlan-id1
to
vlan-id2
}
Matches the VLAN IDs of ISP networks.
The
vlan-id-list
is a list of up to eight VLAN IDs. The
vlan-id1
to
vlan-id2
specifies a VLAN ID range, where
the
vlan-id1
must be smaller than the
vlan-id2
. A VLAN
ID ranges from 1 to 4094.
source-mac
mac-address
Matches a source MAC address.
system-index
index-value-list
Matches a pre-defined match criterion (system-index)
for packets sent to the control plane.
The
index-value-list
argument specifies a list of up to
eight system indexes. The system index ranges from 1
to 128.
NOTE:
Suppose the logical relationship between match criteria is
and
. When using the
if-match
command to
define match criteria, be aware of the following guidelines.
•
If multiple match criteria with the
acl
or
acl ipv6
keyword specified are defined in a class, the actual
logical relationship between these match criteria is
or
when the policy is applied.
•
If multiple match criteria with the
customer-vlan-id
or
service-vlan-id
keyword specified are defined in
a class, the actual logical relationship between these match criteria is
or
.
