106
Default level
2: System level
Parameters
slot
slot-number
: Specifies an IRF member switch number. For a standalone device, the
slot-number
argument can only be 1. In an IRF, with
slot-number
specified, this command configures the buffer
resource of the member switch specified by
slot-number
; without
slot-number
specified, this command
configures the buffer resource of all the member switches in the IRF virtual device.
cell
: Configures the shared resource size in the cell buffer.
packet
: Configures the shared resource size in the cell buffer. This keyword is not available on the
S5820X Switch Series.
ratio
: Sets the shared resource size as a percentage of the cell resource or packet resource in the range
of 0 to 100.
Description
Use the
buffer egress total-shared
command to configure the shared resource size in the cell resource or
packet resource.
Use the
undo
buffer egress total-shared
command to restore the default.
By default, on the S5800 Switch Series, 73% of the cell resource is the shared resource and 74% of the
packet resource is the shared resource; on the S5820X Switch Series, 66% of the cell resource is the
shared resource.
Examples
# Set 50% of the cell resource as the shared resource.
<Sysname> system-view
[Sysname] buffer egress cell total-shared ratio 50
# In an IRF, set 65% of the cell resource as the shared resource on member switch 2.
<Sysname> system-view
[Sysname] buffer egress slot 2 cell total-shared ratio 65
