H3C s5820x series, Справочник по командам ACL и QoS

Страница: 4 / 136

QoS policy
Added commands:
•
control-plane
•
display qos policy control-plane
•
reset qos policy control-plane
Modified commands:
•
if-mtach —Added support for the system-index keyword
•
remark dot1p —Added support for the green , red and yellow
keywords
•
remark dscp —Added support for the green , red and yellow
keywords
•
remark local-precedence —Added support for the green , red and
yellow keywords
•
classifier behavior —Added support for the dcbx keyword
•
qos apply policy —Now available in control plane view
Deleted commands: undo if-match acl
Priority mapping
Modified commands:
•
display qos map-table —Added support for the dot1p-exp ,
exp-dot1p and exp-dp keywords
•
qos map-table —Added support for the dot1p-exp , exp-dot1p
and exp-dp keywords
GTS and line rate —
Congestion management
Added commands: qos wrr weight
Modified commands: qos wrr —Added support for the weight and
byte-count keywords
Congestion avoidance Added commands: queue weighting-constant
Global CAR —
Data buffer —
HQoS All HQoS related commands are newly added to this release.
Conventions
This section describes the conventions used in this documentation set.
Command conventions
Convention Description
Boldface Bold text represents commands and keywords that you enter literally as shown.
Italic Italic text represents arguments that you replace with actual values.
[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.
{ x | y | ... }
Braces enclose a set of required syntax choices separated by vertical bars, from which
you select one.
[ x | y | ... ]
Square brackets enclose a set of optional syntax choices separated by vertical bars, from
which you select one or none.
{ x | y | ... } *
Asterisk marked braces enclose a set of required syntax choices separated by vertical