H3C S5560X-HI Series, Руководство по установке

Страница: 72 / 77

4-21
Figure4-3 40G QSFP+ cable
(1) QSFP+ module (2) Pull latch
Figure4-4 40G QSFP+ to SFP+ cable
(1) QSFP+ module (2) QSFP+ module side pull latch
(3) SFP+ module side pull latch (4) SFP+ module
IMPORTANT:
•
The QSFP+ ports on an LSWM2QP2P interface card do not support the
QSFP-40G-LR4-PSM1310 transceiver module.
•
You can use a QSFP-40G-SR4-MM850, QSFP-40G-CSR4-MM850, or
QSFP-40G-LR4-PSM1310 transceiver module to connect a QSFP+ port to four SFP+ ports. The
QSFP+ transceiver module and SFP+ transceiver modules to be connected must be the same in
specifications, including central wavelength and fiber type.
NOTE:
•
As a best practice, use H3C transceiver modules and network cables for the switch.
•
The H3C transceiver modules and network cables are subject to change over time. For the most
recent list of H3C transceiver modules and cables, contact H3C Support or marketing staff.
•
For the specifications of H3C transceiver modules and network cables, see H3C Transceiver
Modules User Guide .
10G/5G/2.5G/1000BASE-T autosensing Ethernet ports
The LSWM2XMGT8P interface module provides 10G/5G/2.5G/1000BASE-T autosensing Ethernet
ports.
Table4-14 describes the 10G/5G/2.5G/1000BASE-T autosensing Ethernet port specifications.
1
2
3
4
1
2