2-7
S5560X-58C-HI
Figure2-7 Front panel
(1) 10/100/1000BASE-T autosensing Ethernet port
(2) 10/100/1000BASE-T autosensing Ethernet port LED
(3) SFP+ port
(4) Console port (CONSOLE)
(5) Mode button
(6) System status LED (SYS)
(7) Mode LED (MODE)
(8) Expansion module 1 status LED (SLOT1)
(9) Expansion module 2 status LED (SLOT2)
(10) USB port
(11) Micro USB console port
(12) Management Ethernet port LED (ACT/LINK)
(13) Management Ethernet port
(14) SFP+ port LED
Figure2-8 Rear panel
(1) Grounding screw
(2) Fan tray 1 (FAN1)
(3) Expansion module 1 (SLOT1)
(4) Expansion module 2 (SLOT2)
(5) Fan tray 2 (FAN2)
(6) Power supply 1 (PWR1)
(7) Power supply 2 (PWR2)
The S5560X-58C-HI switch comes with power supply slot PWR1 empty and power supply slot
PWR2 installed with a filler panel. You can install one or two power supplies for the switch as
required. In
, two PSR250-12A1 power supplies are installed in the power supply slots.
The S5560X-58C-HI switch comes with the two fan tray slots empty. You must install two fan trays of
the same model for the switch. In
, two LSWM1FANSCBE fan trays are installed in the fan
tray slots.
The S5560X-58C-HI switch comes with a filler panel in each expansion slot. You can select
expansion modules for the switch as required. In
, two LSWM4SP8PM interface cards are
installed in the expansion slots.
1
2
5
3
6
7
9
8
10
4
11
12
13
14
1
2
3
4
5
6
7
