154
<Sysname> display garp statistics interface gigabitethernet 1/0/1 to gigabitethernet 1/0/2
GARP statistics on port GigabitEthernet1/0/1
Number of GVRP Frames Received : 5
Number of GVRP Frames Transmitted : 2
Number of Frames Discarded : 1
GARP statistics on port GigabitEthernet1/0/2
Number of GVRP Frames Received : 3
Number of GVRP Frames Transmitted : 4
Number of Frames Discarded : 2
display garp timer
Syntax
display
garp timer
[
interface
interface-list
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
View
Any view
Default level
1: Monitor level
Parameters
interface
interface-list
: Specifies one or multiple ports. You can provide up to 10 port lists. By using each
list, you can specify a single port in the form of
interface-type interface-number
, or a port range in the
form of
interface-type interface-number1
to
interface-type interface-number2
, where the end port
number specified by
interface-number2
must be greater than the start port number specified by
interface-number1
. If no ports are specified, this command displays the GARP timer settings on all ports.
|
: Filters command output by specifying a regular expression. For more information about regular
expressions, see the
Fundamentals Configuration Guide
.
begin
: Displays the first line that matches the specified regular expression and all lines that follow.
exclude
: Displays all lines that do not match the specified regular expression.
include
: Displays all lines that match the specified regular expression.
regular-expression
: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the
display
garp timer
command to display GARP timer settings on specific ports.
Related commands:
garp timer hold
,
garp timer join
,
garp timer leave
, and
garp timer leaveall
.
Examples
# Display GARP timer settings on port GigabitEthernet 1/0/1.
<Sysname> display garp timer interface gigabitethernet 1/0/1
GARP timers on port GigabitEthernet1/0/1
Garp Join Time : 20 centiseconds
