H3C S3100 Series, Руководство по эксплуатации

Страница: 96 / 1057

2-5
z
To configure a Trunk port into a Hybrid port (or vice versa), you need to use the Access port as a
medium. For example, the Trunk port has to be configured as an Access port first and then a Hybrid
port.
z
Ensure that the VLANs already exist before configuring them to pass through a Hybrid port.
z
The default VLAN IDs of the Hybrid ports on the local and the peer devices must be the same.
Otherwise, packets cannot be transmitted properly.
Configuring a Trunk-Port-Based VLAN
A Trunk port may belong to multiple VLANs, and you can only perform this configuration in Ethernet port
view.
Follow these steps to configure the Trunk-port-based VLAN:
To do… Use the command… Remarks
Enter system view system-view —
Enter Ethernet port view
interface interface-type
interface-number
—
Configure the port link type as
Trunk
port link-type trunk Required
Allow the specified VLANs to pass
through the current Trunk port port trunk permit vlan
{ vlan-id-list | all }
Required
By default, all Trunk ports only
allow packets of VLAN 1 to pass.
Configure the default VLAN for the
Trunk port
port trunk pvid vlan vlan-id
Optional
VLAN 1 is the default by default.
z
To convert a Trunk port into a Hybrid port (or vice versa), you need to use the Access port as a
medium. For example, the Trunk port has to be configured as an Access port first and then a Hybrid
port.
z
The default VLAN IDs of the Trunk ports on the local and peer devices must be the same.
Otherwise, packets cannot be transmitted properly.
Displaying and Maintaining Port-Based VLAN
To do… Use the command… Remarks
Display the hybrid or trunk ports display port { hybrid | trunk } Available in any view.