H3C S3100 Series, Руководство по эксплуатации

Страница: 52 / 1057

3-7
# Enter VTY 0 user interface view.
[Sysname] user-interface vty 0
# Configure to authenticate users logging into VTY 0 using the password.
[Sysname-ui-vty0] authentication-mode password
# Set the local password to 123456 (in plain text).
[Sysname-ui-vty0] set authentication password simple 123456
# Specify commands of level 2 are available to users logging into VTY 0.
[Sysname-ui-vty0] user privilege level 2
# Configure Telnet protocol is supported.
[Sysname-ui-vty0] protocol inbound telnet
# Set the maximum number of lines the screen can contain to 30.
[Sysname-ui-vty0] screen-length 30
# Set the maximum number of commands the history command buffer can store to 20.
[Sysname-ui-vty0] history-command max-size 20
# Set the timeout time to 6 minutes.
[Sysname-ui-vty0] idle-timeout 6
Telnet Configuration with Authentication Mode Being Scheme
Configuration Procedure
Table 3-6 Telnet configuration with the authentication mode being scheme
Operation Command Description
Enter system view system-view —
Enter the
default ISP
domain view
domain d omain-name
Configure the
AAA scheme to
be applied to
the domain
scheme { local | none |
radius-scheme
radius-scheme-name [ local ] |
hwtacacs-scheme
hwtacacs-scheme-name
[ local ] }
Configure the
authenticatio
n scheme
Quit to system
view
quit
Optional
By default, the local AAA scheme is
applied. If you specify to apply the local
AAA scheme, you need to perform the
configuration concerning local user as
well.
If you specify to apply an existing
scheme by providing the
radius - scheme-name argument, you
need to perform the following
configuration as well:
z
Perform AAA&RADIUS
configuration on the switch. (Refer
to the AAA part for more.)
z
Configure the user name and
password accordingly on the AAA
server. (Refer to the user manual of
AAA server.)
Create a local user and enter
local user view
local-user user-name No local user exists by default.
Set the authentication password
for the local user password { simple | cipher }
password
Required
Specify the service type for VTY
users service-type telnet [ level
level ]
Required
Quit to system view quit —