H3C S12500R Series, Установка, Быстрый старт

Страница: 9 / 33

2-4
Slide rail requirements
IMPORTANT:
The device is heavy. Install the device at the lowest possible position.
Attach the required slide rails to the rack before you mount the device in the rack. For more
information about attaching slide rails, see the installation guide for the slide rails.
Before attaching the slide rails, read signs on the slide rails to identify the right and left slide rails
and their front and rear ends. Mount the front end of the slide rails to the front rack posts. Make sure
the slide rail installation positions are at the same height on the four rack posts.
Table 2-2 Slide rail requirements
Device
model
Max. chassis
weight (full
configuration)
Applicable slide rails
Slide rail model Adjustment range
Occupied
space
S12516R 400 kg (881.85 lb) LSXM1BSR
630 mm (24.80 in) to
900 mm (35.43 in)
1 U
S12508R 220 kg (485.02 lb)
LSXM1BSR
630 mm (24.80 in) to
900 mm (35.43 in)
1 U
LSTM2KSGD0
500 mm (19.69 in) to
800 mm (31.50 in)
2 U
S12504R 120 kg (264.55 lb) LSVM1BSR10
630 mm (24.80 in) to
850 mm (33.46 in)
N/A
NOTE:
• The LSXM1BSR slide rail kit includes a left slide rail, a right slide rail, and a front plate. When
attaching the slide rails to the rack, make sure all accessories are correctly installed.
• Flanges of the LSVM1BSR10 slide rails are at the bottom so the slide rails do not occupy rack
space.
Installing cage nuts for attaching mounting
brackets
Before mounting the chassis in the rack, install cage nuts on the front rack posts for attaching the
mounting brackets:
1.
As shown in Figure 2-5 , Figure 2-6 , and Figure 2-7 , determine the cage nut installation holes
and then mark them on the front rack post.
2.
Install cage nuts in the marked square holes on the front rack posts.
For the S12516R and S12508R, cage nuts are not needed for the top two marked square
holes on the right front rack post.
For the S12504R, install cage nuts in all the marked square holes.