5-2
Viewing device startup information
After the device is powered on, the configuration terminal output startup information. The output
information varies by software versions.
The following shows a sample output you will see when the device starts up:
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
Press Ctrl+T to start memory test
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing..........Done.
...
System image is starting...
Line aux0 is available.
Press ENTER to get started.
Press
Enter
at the prompt. When the prompt
<Sysname>
appears, you can configure the device.
After the device finishes startup, verify the following items:
•
The cooling system is working, and you can hear fan rotating noise and feel air being blown
out.
•
The LEDs on the MPUs show that the system is operating correctly. For more information
about LEDs, see
H3C S12500R Switch Router Series Hardware Reference
.
