9
Figure 6 Installing the SFP transceiver module
3.
Remove the dust caps from the optical fibers, and the dust plug
from the transceiver module.
4.
Connect the LC connectors of the optical fibers to the
transceiver module.
Figure 7 Installing the optical fibers
Accessing the switch
The switch supports Web management.
To access the switch:
1.
Connect the switch to a PC. Make sure the switch and PC are
reachable to reach other.
By default, the management IP address of the switch is
192.168.0.233 and the subnet mask is 255.255.255.0.
