Installation Manual
H3C SecPath F100-A Firewall
Chapter 4 Firewall Configuration
4-2
Figure 4-2
Create a new connection
Step 2: Define terminal parameters (using the HyperTerminal on Windows98 as an
example).
1) Select connection port
Select the serial interface to be used from the Connect Using drop-down list. The serial
interface selected here must be the one connected to the console cable.
Figure 4-3
Select connection port
2) Set the connection port
The [Settings] tab appears as shown in Figure 4-4, and set the serial interface
parameters as follows:
z
Bits per second = 9600