H2X THERAPOOL SE Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 108

background image

37

DO NOT DIVE.

101

DO NOT DIVE.

SITE PREPARATION / GENERAL GUIDELINES

GUIDELINES FOR PARTIALLY OR FULLY RECESSED INSTALLATION

Swim Spas manufactured by Master Spas are designed to be installed in a variety of settings. One
of which is installing below grade. Should a swim spa be installed below the level of the site drain-
age system (below grade), a system for preventing water collecting and pooling must be designed
based on the requirements of the local authority having jurisdiction. The drainage system must be
designed based on things such as rainfall, water runoff, splashing, draining the swim spa, etc. that
could potentially feed the below grade area with water. When located in designated floodways,
additional attention to maximum water load entering the area below grade must be addressed
to prevent water from accumulating below grade at all times. It is generally recommended that
the swim spa be installed above grade because the swim spa is not designed to be submerged in
water. When a proper drainage system is designed and proper ventilation is planned based on the
characteristics of the site, installing the swim spa below grade is an accepted method of installa-
tion.

• The unit is self-supporting when placed on a surface designed to support the full load of the

swim spa (see Surface/Pad Requirements). Do not backfill with sand, gravel, or earth. Doing so
will void the warranty.

• Plan for complete drainage so that water accumulation drains away from the swim spa perimeter

and standing water never reaches the electrical equipment.

• Plan for appropriate ventilation to remove moisture accumulation and prevent equipment

overheat.

• Provide a minimum of 3 feet service area around the perimeter of the unit. Site access issues are

not covered by the product warranty.

• The unit is not designed to be submerged in water. Water entering the equipment area creates

many hazards and resulting damage will not be covered by the product warranty.

• Make sure that the surroundings do not create any additional hazards.
• Surfaces placed around the unit should also be evaluated for walking/slipping hazards from

standing water. Proper drainage is vital to the installation of a below grade installation.

• Check all building, electrical, and plumbing codes with the authority having jurisdiction to ensure

that your installation is in compliance with all local codes.

• Additional consideration needs to be made when installing unit in designed floodways.
• Verify that site specific drainage systems such as down spouts are not going to feed the area

below grade.

• Below grade drainage system needs to be evaluated based on area specific rainfall. One size

does not fit all so an analysis by a qualified, local engineer to ensure proper drainage of all sourc-
es of water is a must when installing below grade.

«
...
37
38
39
40
41
...
»

Содержание THERAPOOL SE













































































































Отзывы:

Нет отзывов

Похожие инструкции для THERAPOOL SE

Бренд: Jacuzzi Страницы: 2

Бренд: Philips Страницы: 100

Бренд: Daybreak Fitness Страницы: 24

RelaxComfortDuo

Бренд: SpaDealers Страницы: 4

Бренд: Sharper Image Страницы: 4

Бренд: HydroAir Страницы: 8

Бренд: Jacuzzi Страницы: 80

Бренд: Jacuzzi Страницы: 56

Бренд: Jacuzzi Страницы: 29

J-ALLURE J-ALLURELuxury Bathing and Entertainment...

Бренд: Jacuzzi Страницы: 32

Portable and In-Ground Spas

Бренд: SCS Industries Страницы: 18

Бренд: AquaEze Страницы: 17

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды