manualshive.com logo in svg

H2X THERAPOOL SE, Руководство пользователя, Страница: 31 / 108

Поделиться
Скачать
H2X THERAPOOL SE Скачать руководство пользователя страница 31

29

DO NOT DIVE.

103

DO NOT DIVE.

REGULAR MAINTENANCE PROCEDURES

NOTE: These maintenance procedures are the responsibility of the swim spa owner to perform. 
These procedures are not covered by the swim spa warranty.

CARE OF YOUR SWIM SPA PILLOWS

•  Your swim spa pillows should be rinsed periodically to remove chemical residue. This helps 

improve pillow lifespan and slows down deterioration of the pillows (i.e. discoloring, becoming 
stiff and flaking of the material).

•  If the swim spa will not be used for a period of time, the pillows could be removed and rinsed to 

prolong their life.

NOTE:  Do not cover the swim spa for 15 minutes after adding chemicals as the off gas can cause 

damage. 

CARE OF YOUR SWIM SPA COVER

Always cover your swim spa when not in use with an approved insulating swim spa cover by Master 

Spas. This will greatly reduce energy consumption and will cause swim spa water to heat more rap-

idly. Water loss and chemical usage will also be reduced.
• Be sure to lock down all straps on the cover after each use.
•  Do not allow swim spa to sit uncovered in direct sunlight. This may cause damage to exposed sur-

faces of swim spa and possible discoloration of swim spa fittings.

•  Periodically hose off both sides of swim spa cover for maximum life of cover. Once a month use a 

vinyl cleaner and conditioner on the vinyl portion of your cover. Rinse residue off. See cover manu-

al/instructions for detailed instructions on proper cover care. 

• Keep cover open for 15 min. after adding chemicals to prevent off gas damage.

NOTE:  

If your swim spa is going to be left empty for prolonged periods, do not replace cover directly 

on surface of swim spa. Place 2”-3” blocks between cover and swim spa. This allows for ade-

quate ventilation of cover and swim spa.

NOTE:  

The cover warranty is not part of the limited warranty provided with the swim spa. It is pro-

vided through the cover manufacturer and may not be through Master Spas. Check the tags 

and labeling on your cover to verify manufacturer and refer to the manufacturer’s care, main-

tenance and warranty information. Your dealer can help provide you with these details.

NOTE:  

Always turn water feature valve down so that the water features do not hit the cover when 

the cover is closed.

CARE OF YOUR SWIM SPA CABINET

The swim spa cabinet is made from a UV resistant material. The cabinet requires only periodic clean-

ing with a stream of water from a garden hose. 

CARE OF OPTIONAL EXERCISE EQUIPMENT

The optional exercise equipment package makes it easy to exercise in your own backyard. There 
are shell mounted clips that are used to fasten the rowing equipment to the swim spa. These clips 
are located along the sides of your swim spa next to the grab rails that are placed around the 
perimeter of the swim area. Also available are ankle fins and exercise bells that will allow you to do 
resistance training. See your Master Spas dealer for details. 

CAUTION:  Do not leave exercise equipment inside the swim spa when not in use. Do not leave exer-

cise equipment outside exposed to ultra violet rays. Failure to follow the above guidelines 

could result in injury. 

CAUTION:  Inspect exercise equipment before each use for deterioration and unsafe conditions. Do 

not use if significant deterioration and unsafe conditions exist (i.e. cracking and break 

down in bungee strap material caused by use, water conditions and care). Replacement 

exercise kits can be purchased through your Master Spas dealer. Failure to follow the 

above guidelines could result in injury. 

Содержание THERAPOOL SE













































































































Отзывы:

Нет отзывов