BREAK-IN PERIOD
Due to the brand new stainless steel in the boiling tank, you may
perceive a very slight “new smell” or faint taste from the first couple
cycles or so. However, the water is completely pure and safe to
consume. Any residual scent or taste dissipates with each use until the
water becomes completely odorless and tasteless.
Unlike water filters that begin deteriorating with the very first use, and
continue to get worse as additional water is filtered, pure water made
with H2oLabs systems just gets BETTER and BETTER with each
cycle.
To expedite the break-in process, it is recommended to clean the boiling
tank after each use with a Scotch-Brite™ or similar NON-METAL
scouring pad, using plain white distilled vinegar or a couple drops of
dish washing-up liquid and warm water. Cleaning in this manner will
produce a slight “polishing” effect on the interior of the boiling tank to
reduce any surface coarseness. A couple minutes is all it takes to clean
and prepare the unit for the next cycle. (See “Cleaning Instructions”.)
As the unit is cleaned after each cycle, the stainless steel will lose the
ability to retain any new smell or taste. After the first few cycles there
should be hardly any taste at all and in fact at that point it will “taste”
better than any other filtered or bottled water.
CLEANING INSTRUCTIONS
Clean the inside of the boiling tank after each cycle has ended and
the unit has cooled for at least 30 minutes.
1. Remove Carafe from the Main Unit and empty into a pitcher or other
storage container, (and/or directly into your coffee/tea maker), for use.
2. Unplug the Main Power Cord from your household outlet FIRST and
then from the unit.
3. Unplug the Fan Power Cord from the Fan Power Cord Socket and
remove Head Assembly from the Main Unit.
- 12 -
