h/p/cosmos cos30005-01va05 Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 90

h/p/cosmos cos30005-01va05 Скачать руководство пользователя страница 47

page 47 of 90

cos105000_200-300_75-125, rev. 1.03

© 1988 - 2019 h/p/cosmos sports & medical gmbh

11 Maintenance

❚

Obey the maintenance intervals claimed in chapter “maintenance”.

❚

Obey the competences claimed in chapter “maintenance”.

❚

A second person has to be present during maintenance.

❚

In case of any visible or assumed defects or malfunctions (of the device, accessories, software, etc.), unplug device, exclude

reconnection, mark clearly and inform h/p/cosmos service personnel via telephone and writing.

❚

In case of any visible or assumed wear and tear (of the device, accessories, labels, etc.), unplug device, exclude reconnection,

mark clearly and inform h/p/cosmos service personnel via telephone and writing. Do not change or remove any labels!

❚

In case of any fluid entering into the device, unplug device, exclude reconnection, mark clearly and inform h/p/cosmos service

personnel via telephone and writing.

Do not perform maintenance during use.
Proper maintenance is an important pre-condition for safety, reliability, function and accuracy of the device.
Support h/p/cosmos service personnel with the documents needed.

11.1 Intervals and competences

Maintenance

Interval

Competence

Daily inspection

Daily

Operator

Lubrication

When OIL message occurs

Operator

Adjustment of running belt

If due

Operator

Safety inspection

12 months

h/p/cosmos service personnel only

Change of safety arch rope

24 months

h/p/cosmos service personnel only

Tightening of the running belt

If due

h/p/cosmos service personnel only

Adjustment of levelling sockets

If due

h/p/cosmos service personnel only

Installation and repair work

If due

h/p/cosmos service personnel only

h/p/cosmos recommends entering into a service contract with an authorized h/p/cosmos service technician.
A service contract provides the best preventive maintenance and care for the device.
The service contract is available at

[email protected]

.

To receive information on becoming h/p/cosmos service personnel, please contact [email protected].

11.2 Daily inspection

❚

Perform a daily visual inspection (see chapter “maintenance”).

Before daily use, check the whole device for wear and tear.

Description

Illustration

Pay special attention to components with high probability of wear

and tear:
1. Running belt and non-slip surfaces
2. External cabling
3. All textile parts
4. Fall prevention incl. safety harness, buckle, carabiner, rope

and rope arrest

If there is any visible or assumed wear and tear, unplug device,

exclude reconnection and call h/p/cosmos service personnel.

«
...
45
46
47
48
49
...
»

Содержание cos30005-01va05



























































































Отзывы:

Нет отзывов