H.264 NETWORK DIGITAL VIDEO SURVEILLANCE RECORDER, Инструкция по эксплуатации

Страница: 28 / 51

28
28 INSTRUCTION MANUAL
2) Under PROTOCOL, select PELCO-D or PELCO-P for the selected channel.
Click NEXT PAGE for additional channels (8-channel models only).
3) Under BAUD RATE, select 1200 , 2400 , 4800 , or 9600 .
4) Under DATA BIT select 5 , 6 , 7 , or 8 .
5) Under STOP BIT, select 1 or 2 .
6) Under VERIFY, select ODD , EVEN , MARK , SPACE , or NONE .
7) Under ADDRESS, enter an address from 001~255 using the Virtual Keyboard.
Refer to your PTZ camera`s instruction manual for further details.
8) Click APPLY . Click CLOSE in the confirmation window.
9
）
Click EXIT in all menus until all windows are closed.
18 NETWORK
Use the Network Setup menu to configure your network and DNS settings.
Figure 2.5.2.18.1 network setup
UPNP
UPnP Forum is an industry initiative designed to enable simple and robust connectivity
among consumer electronics, intelligent appliances and mobile devices from many
different vendors. As a group, we are dedicated to making the connected home and
lifestyle mainstream experiences for consumers - and great opportunities for the industry.
NOTE: Need your Router to support UPNP function.
To configure UPNP settings:
1
）
Enable the UPNP function in your Router.
2
）
Under DVR GUI
，
Open the MAIN MENU and click ADVANCE .
3
）
From the Advanced Setup menu, click NETWORK .
4
）
Under UPNP , select OPEN .
5
）
Click APPLY to save your settings and then click OK in the confirmation window.
6
）
Using a remote PC, open Internet Explorer .
7
）
In the address bar, enter your Router WAN IP address immediately followed
by :WEB PORT (no spaces).
http://XXX.XXX.XXX.XXX(Router WAN IP):XXX(WEB PORT)
1) Enter your system ADMIN password and select INTERNET .
NOTE: If you have not enabled passwords on the system, leave the password field blank.
2) Click LOGIN .
To configure network settings:
1
）
Under TYPE, select DHCP , PPPoE , or STATIC . If DHCP, go to step 5. If PPPoE,
go to step 2. If STATIC, go to step 3.