H.264 NETWORK DIGITAL VIDEO SURVEILLANCE RECORDER, Инструкция по эксплуатации

Страница: 25 / 51

25
25 INSTRUCTION MANUAL
number of the system.
Figure 2.5.2.13 System info
14 MOTION DETECT
Configure motion detection for each channel.
Figure 2.5.2.14 Motion detect
To configure motion detection:
1) Under STATUS, select ON to enable motion detection for the desired channel.
Click NEXT PAGE for additional channels (8-channel models only).
2) Under SENSITIVITY, select 1 , 2 , 3 , or 4 . The higher the number, the more
sensitive the motion detection.
3
）
Under MD SETUP, click SETUP . The red motion grid appears over the selected
channel in full screen.
4) Click the blocks in the grid to enable/disable motion detection. Red=motion
detection enabled; Clear=motion detection disabled.
5
）
Right-click anywhere on the screen to return to the Motion Detection menu.
6
）
Click APPLY . Click CLOSE in the confirmation window.
7
）
Click EXIT in all menus until all windows are closed.
NOTE: You can disable the MD buzzer in the Alarm Setup menu.