GYS TIG 250 AC/DC, Руководство пользователя

Страница: 8 / 24

Vertical Down weld X X SYNERGIC mode
Spot delay X X Spoting time
Thickness of the metal
to be welded
X X
Material thickness guide in SYNERGIC
mode
MMA process MMA X
TIG AC process AC X
TIG DC process DC X
SYNERGIC mode SYNERGIC X X
Standard mode STD X X
Pulse mode PULSE X X
Spot mode SPOT
X X
2T 2T X X 2 Time torch mode
4T 4T
X X
4 Time torch mode
4T LOG 4T LOG X X 4 Time LOG torch mode
Languages X X X Selection of the language
Control board locking X X X
Locking the control board to stop
accessing to menus and parameters
Control board
unlocking
X X X
Unlocking the control board to open
back the access to menus and
parameters (default code: 0000)
Password modification
X X X
Allow the modification of the password
Reset parameters RESET X X X Allow to restore the original parameters
Identification ID X X X
After Sales module to identify the
machine
Backup menu X X X
Menu where old welding parameters
are saved
Save X X X
Save the welding parameters under the
name given
Save as X X X
Save the welding parameters with a
new name
Open X X X
Open a welding configuration saved
previously
Delete X X X
Delete a welding configuration saved
previously
Thermal protection X X X
Symbol indicating the state of the
thermal protection
Connect-5
X X
Automate mode
MMA WELDING (ELECTRODE)
Getting Started
•
Connect the electrode holder and earth clamp to the corresponding sockets.
• Ensure that the welding polarities and intensities indicated on the electrode packaging are observed.
• Remove the electrode from the electrode holder when the machine is not in use.