MEASUREMENT OPERATION
34
Warning
To avoid harm to yourself, do not input higher than DC 60V or AC 30V voltages.
To measure temperature, connect the Meter as follows:
1.
Set the rotary switch to
˚
C or
˚
F
2.
Insert the temperature probe into the input terminal as shown on the figure 9.
3.
Place the temperature probe to the object being measured.
After few seconds, the measured value shows on the display.
4.
Press
BLUE
button to toggle between
˚
C and
˚
F temperature.
Note
To avoid measurement errors, especially low temperature measurement errors,
ensure the operating temperature does not exceed 18 ~ 28
˚
C.
When temperature
measurement has been completed, disconnect the connection
between the temperature probe and the object being measured, and remove the
temperature probe away from the input terminals of the Meter.
Содержание GDM-397
