GVM-VAC GVM8000, Руководство пользователя

Страница: 28 / 124

28
GVM-VAC
www.gvm-vac.com
Operating Section
3.1 Starting Engine
Always make sure the PTO is disengaged before
starting unit. (See figure 3b)
Thoroughly read and understand the safety and
pre-operating sections of this manual before star-
ing the engine.
DO NOT start the engine in an enclosed building.
Proper ventilation is required before starting the
engine.
figure 3a
Review the Engine Operating Manual supplied with your
leaf vacuum for specific start-up, maintenance and operat -
ing instructions. It is especially important to review break-in
service procedures for brand new units.
Starting Procedure (refer to figures 3a and 3b):
1. Perform all the pre-starting, pre-operating checks out -
lined in the EOM and in this manual.
2. Make sure the PTO is disengaged as shown in figure
3b.
3. Turn the throttle control (fig. 3a) counter-clockwise 2
revolutions.
4. Depress and hold the Murphy switch while starting.
figure 3b