GVM-VAC GVM8000, Руководство пользователя

Страница: 26 / 124

26
GVM-VAC
www.gvm-vac.com
Pre-Operating Section
2.6 Work Site Preparation
Never place any part of the body under or behind guards or any
other visually obscured area.
Making sure the leaves are clear of possible dangerous material is
critical to safe vacuuming. Vacuuming up metal, glass, rocks or
other dangerous material CAN cause serious damage to the equip-
ment or personal injury.
The following guidelines must be followed to insure safety.
1. An inspection of the leaves to be vacuumed must be done prior to the
vacuuming process. We realize that it is impossible to completely inspect
every inch of leaves being vacuumed, but it is imperative that all leaves be
inpsected for obvious dangerous material before vacuuming.
2. The operator should never be in the line of traffic, the operator should work
on the shoulder whenever possible.
3. The operators should place cones or other barriers to provide adequate
warnings to vehicles and pedestrians that vacuuming is in progress.
4. Strobe lights on the leaf vacuum and on the tow vehicle should be on at all
times for high visibility.
5. Confirm that all operators are wearing proper clothes and personal protec -
tive equipment.
6. Restrict all personnel, except the operator from the area near the leaf vac -
uum. DO NOT allow pedestrians, children or animals near the work area.
7. Make sure that the exhaust hose (if equipped) fits properly into the box
container so that all debris is blown into the box container.