GVC SL5598, Руководство пользователя

Страница: 28 / 57

3. INSTALLATION
3.5.3 Floppy Drive Connector (J6, 33-pin block)
The FDC sub-system is capable of
controlling three types of floppy drives
(1.2, 1.44 and 2.88MB) or compatible
tape drives. The connection to the floppy
drive is via a header (J19). The floppy
disk interface includes 48mA drivers and
inputs on the drive interface.
WARNING: When you connect a ribbon cable to this port, you must orient the cable
connector so that the PIN 1 edge of the cable is at the PIN 1 end of the
onboard port as well.
3.5.4 Power Input Connector (J9, 20-pin block)
The Power Input connector
supports a standard AT power
supply. When connecting make
sure the lock key matches the hook
attached on a power supply cable.
The power cord should be
unplugged when you connect it.
C
1 2
3 4 3 3
C