GVC SL5598, Руководство пользователя

Страница: 27 / 57

3. INSTALLATION
3.5 Connectors
The SL5598 motherboard contains IDE, floppy, power input, front panel, back
panel and additional connectors.
3.5.1 Primary IDE Connector (J14, 39-pin block)
The primary IDE connector supports two primary channel IDE devices via a ribbon
cable. When two IDE devices are installed using the primary IDE connector, make sure
that the second IDE device is set to slave mode as indicated in the device’s manual.
3.5.2 Secondary IDE Connector (J16, 39-pin block)
This connector supports two secondary channel IDE devices as well as the 120MB
Floppy drives via a ribbon cable. When two IDE devices are installed using the
secondary IDE connector, make sure that the second IDE device is adjusted to slave
mode as instructed in the device’s manual.
WARNING: When you connect a ribbon cable to these ports, you must orient the
cable connector so that the PIN 1 edge of the cable is at the PIN 1 edge
of the onboard connector.
1 2
40 39
1 2
40 39
C
Pri. IDE
Sec. IDE