GVA GVA26LEDCP, Инструкция по эксплуатации

Страница: 27 / 47

27
Menu Options on TV Mode (Cont.)
Picture menu
Press [MENU] to display the main menu.
Press
/ to select Picture in the main menu,
then press or [OK] to enter.
Picture mode
Press
/
or [OK] to enter the Picture Mode
sub-menu.
Press / to change the picture mode in
sequence: Dynamic Standard Mild
Personal.
Picture menu
Press [MENU] to display the main menu.
Press
/
to select Picture in the main
menu, then press or [OK] to enter.
Picture mode
Press
/
or [OK] to enter the Picture Mode
sub-menu.
Press
/
to change the picture mode in
sequence: Dynamic Standard Mild Personal.
You can also press [P.MODE] repeatedly on the remote control to change the picture
mode directly.
NOTE : Contrast, brightness, colour and sharpness value can only be adjusted in
“Personal Mode”.
Contrast
Press
/
or [OK] to enter the sub-menu, then press
/
to set the picture contrast
intensity.
Brightness
Press
/
or [OK] to enter the sub-menu, then press
/
to set the picture
brightness.
Colour
Press
/
or [OK] to enter the sub-menu, then press
/
to set the picture colour
intensity.
Tint
Press
/
or [OK] to enter the sub-menu, then press
/
to set the picture tint
(only available for NTSC video signal).
Sharpness
Press
/
to set the picture sharpness.
Colour temp
Press / to change the colour temperature in sequence: Cold Normal Warm.
Noise reduction
Press
/
or [OK] to enter the submenu, then press
/
to change the noise
Low Medium Default. High
ium e
Menu Options in TV Mode (Cont.)
27
You can also press [P.MODE] repeatedly on the remote control to change the picture mode
directly.
NOTE:
Contrast, brightness, colour and sharpness value can only be adjusted in “Personal
Mode”.
Contrast
Press
/
or [OK] to enter the sub-menu, then press
/
to set the picture contrast
intensity.
Brightness
Press / or [OK] to enter the sub-menu, then press / to set the picture brightness.
Colour
Press / or [OK] to enter the sub-menu, then press / to set the picture colour intensity.
Tint
Press
/
or [OK] to enter the sub-menu, then press
/
to set the picture tint (only
available for NTSC video signal).
Sharpness
Press / to set the picture sharpness.
Colour temp
Press / to change the colour temperature in sequence: Cold Normal Warm.
Noise reduction
Press / or [OK] to enter the submenu, then press / to change the noise reduction in
sequence: Off Low Medium High Default.