GVA GVA26LEDCP, Инструкция по эксплуатации

Страница: 29 / 47

29
Menu Options on TV Mode (Cont.)
Time menu
Press [MENU] to display the main menu.
Press
/ to select Time in the main menu,
then press or [OK] to enter.
Clock (DTV only)
Display the current system time.
NOTE:
You cannot change the time
manually in DTV mode, as the time
comes directly from a signal source.
Time menu
Press [MENU] to display the main menu.
Press / to select Time in the main menu,
then press or [OK] to enter.
Clock (DTV only)
Display the current system time.
NOTE
: You cannot change the time
manually in DTV mode, as the time
comes directly from a signal source.
Time Zone (DTV only)
Press
/
or [OK] to enter the sub-menu, then press
/ / /
to set the appropriate
time zone according to your region.
Sleep timer
after a certain time.
Press / or [OK] to enter the Sleep Timer sub-menu, then press / to set the
180 or 240 minutes.
You can also press [SLEEP] repeatedly on the remote control to change the sleep
timer directly.
Auto stand-by
You can select the time after which you want the TV to switch automatically to
stand-by.
Press
/
or [OK] to enter the sub-menu, then press
/
3hrs, 4hrs or 5hrs.
OSD Timer
You can set your preferred duration for on-screen display messages.
Press
/
or [OK] to enter the sub-menu, then press
/
to set the OSD timer to
5, 10, 15, 20, 25 or 30 seconds.
Daylight-Saving Time (DTV only)
Press /
Menu Options in TV Mode (Cont.)
29
Time Zone (DTV only)
Press
/
or [OK] to enter the sub-menu, then press
/ / /
to set the appropriate
time zone according to your region.
Sleep timer
You can select to have the sleep timer off, or set it to switch the TV off automatically after a
certain time.
Press
/ or [OK] to enter the Sleep Timer sub-menu, then press / to set the sleep timer
to off, or to switch the TV off automatically after 10, 20, 30 ,60, 90, 120, 180 or 240 minutes.
You can also press [SLEEP] repeatedly on the remote control to change the sleep timer
directly.
Auto stand-by
You can select the time after which you want the TV to switch automatically to stand-by.
Press
/
or [OK] to enter the sub-menu, then press
/
to set auto stand-by to Off, 3hrs,
4hrs or 5hrs.
OSD Timer
You can set your preferred duration for on-screen display messages.
Press / or [OK] to enter the sub-menu, then press
/
to set the OSD timer to 5, 10, 15,
20, 25 or 30 seconds.
Daylight-Saving Time (DTV only)
Press / or [OK] to set the daylight-saving time to On or Off.